Belts for emco rex B20

[abbas abboobaker]

Any ideas as to Where I can purchase Will appreciate greatly

 

[Woodparadise]

It's a bit harder to find replacements for that vintage model but not impossible. You can try Austrian sites since emco line originated in Austria. Check on rcm.at and emcoshop.at

 

[d@rkr00m]

Any ideas as to Where I can purchase Will appreciate greatly

check some online retailers, I mean websites like VBelts4Less.com, V-Belt Global Supply, or Grainger often carry standard industrial V-belts.
You'll need to know the exact dimensions (top width, thickness, and length).
The "B20" likely means a B-section (5/8" top width, 13/32" thickness) with a specific length.
also some local industrial supply houses. Check for local shops that specialize in power transmission belts. They can often measure your old belt (if you have it) or cross reference the machine's specifications.

 

[w0odshap3r]

Any ideas as to Where I can purchase Will appreciate greatly

Have you checked with industrial supply companies that specialize in power transmission belts?
If you can get the belt's dimensions and type from your user manual, you might be able to find a direct replacement.
Also, I'd suggest looking into parts dealers who specifically sell vintage woodworking or metalworking machine parts.
They often have hard-to-find components or can give you some leads!

 

[rainbow pop]

The only distributor I know is international. You can buy belts for an EMCO Rex B20 by contacting the manufacturer directly at REX Holzbearbeitungsmaschinen or through the spare parts retailer Remlagret.se. Other authorized distributors like the company Elcomp, located in Africa, may also supply the necessary parts. Might take time to be delivered. eBay should be a good resource too.

 

[darcy0641]

+1 @Woodparadise You can check this website below. I recommend contacting them first to see if they can deliver to your shipping address.

https://www.emcoshop.at/